It's a very challenging job to build the splitter on my own; some people don't know from where they have to start? To help you, I am searching on the internet and find out an easy way to set up and build a perfect log splitter. Here I am planning you to show you the following log splitter customizing procedure, and I am sure you can use these splitters according to your needs properly.
For reducing the cost, I will show you. How can you build a homemade log splitter?
You can follow the list of homemade log splitters, and you can simply apply the techniques to inspire others as well.
Honda GX160 Powered Homemade Log Splitter DIY Guide:
This horizontal splitter ran on a 5.5 Hp Honda GX160 and mounted on a solid frame and beam, which made from angle iron. The framework connects with the axle using springs.
You can get 12 inches tall wedges at the end of each beam. That is quite a sharp edge. Before making this tool, you need to make a plan and calculate details to see the picture of this device. This hydraulic log splitter can customize easily
The Unicorn Log Splitter:
When you use this splitter, you can feel that the design and the working process are entirely unfamiliar but very useful.
This power tool has a spiral unicorn-like screw on the head and which screws into the log blocks and split it as well. The main job is to make a unicorn-like screw head. This screw can drill itself for cutting the logs. First, we should know How to make a unicorn-like screw or how to make a corkscrew? So, after getting the corkscrew, the major part is done. Now, connect the head to the generator and set up all the parts, just like the picture.
This device is very creative and safe to use. You can split a large amount of wood with this hand making splitter.
The wheel of Debt:
If you want to build a splitter with minimum cost and from the pieces of scrap around you, maybe this splitter is for you.
How to build the Wheel of Debt?
The technique is not complicated at all. This device has a large wheel and has an ax- headed feature welded with the wheel, where the cutting bed is mounted and also attached to the gas engine. This engine can turn the wheel, and the logs are keeping on the blade's way to split.
The design is very user friendly, and you can make this with the materials that you can get around you. So, making the cost is very low. Like sometimes not more than $ 14. This device can give a cleaner piece of firewood.
During using this log, you need to be extremely careful; otherwise, there will injure seriously. So, before starting splitting, take all the safety precautions. Weld the ax-headed feature strongly otherwise it mayflies off the wheel. I am very confident that when you make the device, you know how to split the log with this wheel of debt.
Ed's Professional-Quality DIY Vertical Log Splitter:
This Ed is a vertical log splitter that looks like it comes from the factory. The materials of this layout, the color, controls, and other features make this DIY different, and you can build the right device.
The drivers of this device have a two-stage hydraulic pump with a 4-inch diameter, 24 inch length, and it has a 12-HP Kohler gas engine. Ed has a complete steel tool device and made by a 1-inch thick and razor-sharp splitter. The hydraulic reservoir of this machine is an air compressor with a 13-gallon capacity. One of the best parts of this device is the button-controlled loading arm that can make this tool a perfect splitter for the users.
Saab 900 & Beer Keg DIY Log Splitter:
The tires and the axle you can see comes from the Saab 900. This tool can split the log both horizontally or vertically. It has a hydraulic reserve also.
During the vertical position, this device has a steel footplate. The cylinder comes from a bucket truck. You can make this tool comfortably by merely cutting and welding systems. This homemade log splitter is more powerful than any other homemade splitter.
When you don't like any big or bulky splitter, you can try this smaller version splitter. This lower version splitter can work pretty well. You can keep this creative splitter in your mind when you decide to make any log splitting device in your home.
Custom DIY Firewood Processing Machine:
Some people are very creative and trying to make splitter differently. This customizes firewood processing machine includes a chainsaw and with the splitter.
You have to use both of your hands and foot to control the device. Use your hands to control the chainsaw and foot to control the splitter. It can work more time faster than all other manual homemade splitters.
You have to include a kill- switch on the control penal and also a guard inside the chainsaw area to make the device safer. Keep it in your mind that when you decide to build this splitter must do planning before starting to make it.
Here the above video will show you how to build this customize log splitter and how to operate it efficiently.
Homemade Foot-Operated Log Splitter DIY Tutorial: anyway, now I will come to show you the most and reasonable way to split wood with the natural homemade tools.
Here you use your foot to pump the bottle jack, which can raise your logs until it reaches the wedges and split adequately. You need to arrange durable metal pieces and have to do lots of cutting and welding jobs as well. You can found these metal pieces inside the junk also.
You need to make a plan and drawing that How can you build this Foot-Operated Log Splitter, before making this tool.
Take a frame and stands this frame upright with the edge of the top. After that, make a platform that can move up and down on this frame. Use a controlling jack. You will need to add a suitable foot pedal to this jack.
As this tutorial already shows you the weak points and what you can do about them, it would be advisable to begin building your splitter with heavy-duty materials from the beginning.
Here you can use a small size log to split. Cannot use any massive duty log to split with this tool.
Manual Log Splitter DIY Plans:
Now, I am going to show you how to make a complete manual log splitter.
To operate this tool, you need your strong hand force. Heating with the wood needs good stuck of logs every day. And this manual splitter is helpful for you to split a large amount of timber daily. This device has a counterweight, and spring allows gravity to do lots of work. Use your hand to drive down the massive wedge on the lever, and a spring used to turn it back again.
DIY Vertical Hydraulic Log Splitter Guide:
It's an excellent verticle hydraulic log splitter to finish your splitting job with a small amount of cost. And if you don't know how to build a hydraulic log splitter, this guideline is helpful for you.
For making this device, take a 4 inches diameter cylinder and also a generator of at least 5 Hp. Don't use any steel pipes for the hydraulic lines. Use a 5" X 10" steel I-beam.
When I am using a log splitter, I always try to found the most tiring part of splitting the wood with a standard hydraulic splitter. So, I like to design this type of splitter. Here a cylinder moves vertically and split the log and place aground level platform. Take a chunk of wood one by one and relieve them onto the low base plate where they can knock. When they divide, I need to move every chunk under the wedge for splitting again.
For this tool, use a food paddle assembly that can free both of your hands while operating the device except giving the logs. The paddle that attached with the strong spring, which has a push and pulls capacity to control the lever. For this system, you can get some time to place the next log for splitting. Here you have to adapt the paddle and the valve operation in a vertical setup. For this setup, you can just easily control the device.
When I am using this tool, I mounted the whole device on an old automobile axle, which has a v-shaped framework.
So, genuinely this splitter is excellent and transportable and ideal for use. You can split the biggest tree with the help of this device.
Scandinavian Homemade 30-Ton Monster Wood Splitter: Here, a tractor engine drives its hydraulic pump and cylinder, which come from a container truck. When you want to build the 30 Ton Monster Wood Splitter, you need to arrange a heavy-gauge steel and the 8-headed splitter.
This device has a huge power to force the logs through the blade sections and split it into several pieces. You can compare this tool with the gas-powered log splitter. This noise splitter can split hardwoods and a considerable amount of wood.
From the above guides, I am trying to show you the procedure, How to make a homemade log splitter? Or How to build a log splitter? I am sure you can get the answer of how to build your own log splitter? Generally, making a log splitter on your own can save lots of cash, and at the same time, you can prove your creativity also. But you have a very good idea of how to make it. The pictures and videos definitely help you to make perfect tools. But make sure you must take proper safety precautions.
At the end of the article, you can see that there is no log splitter making kits here, but the still photos and the tutorial will show you details. So, nothing to worry about for the winter. Follow the instructions and fix your machine with less cost and enjoy the beautiful winter.